Kaip suprantu sudėtinga nėra:
Instructions:
Remove engine cover
Disconnect the two electrical connectors at the front.
Detach the air intake hose.
Loosen the screw on the metal strap and detach the hose, leaving the MAF attached to the filter housing box.
Holding the hoses and cables out of the way, lift the front of the box, it'll be stiff but you're lifting the existing rubber bungs from the frame.
Once the front is out, you can pull the whole thing forward to remove the rear bungs.
Pull the old bungs and replace with the new ones - I applied some grease to help things go back in place easily.
Everything back together
Tik kiek jų nusipirkt.
Beje teko skaitinėti, kad kai kas išsprendė problemą, pakeisdamas ar tiesiog palenkdamas tuos užspausdėjus, kad užspaustu viršutinį dangtelį geriau.
|