Citata:
Pradžioje rašė mercedinis
 ))))))) kur taip parasita? kad nusiresetina deze? |
Normal 0 This procedure resets the transmission ECU adaptive learning algorithm:
1. Turn the ignition key to the on (not start) position.
2. Press the gas pedal to the floor and hold for five seconds.
3. Turn the key to the "off" position (don't remove the key), then release the gas pedal.
4. Wait at least two minutes for ECU to reset.
Another take on the same thing:
Since the 722.6x transmissions are "Driver Adaptive", I recently learned you can "send your transmission back to school". I had noticed a bit of a harder shift in one of the cars, so I thought I would give this tutorial a go:
1. Turn the "key" to position "2" (with door closed).
2. Press the accelerator completely to the floor, and hold there for 5 Seconds, then let go.
3. Turn the key to "Off", but don't remove the key.
4. Wait for at least 2 minutes, without opening the doors. (It lets the Tranny computer completely "reset" itself)
5. Start the car/truck, and use the driving style you would like the computer to remember. Apparently, around "40" shifting cycles are needed to get the "hang of it" for your driving style.
|